Prof. Ir. Dr. Mohammad Shahril Bin Osman E-Portfolio

PROF IR DR MOHAMMAD SHAHRIL BIN OSMAN

Office no. : 084-367543, Phone no.: 016-8699934

Email : drshahril@uts.edu.my

Education

  • PhD in Mechanical and Manufacturing Engineering,Loughborough University, United Kingdom (2003)

Thesis: Measurement of Granular Contact Forces Using Frequency Scanning interferometry

Supervisors: Prof JM Huntley

Co – supervisor: Dr. RD Wildman

  • BEng (Hons) in Mechanical Engineering
    Loughborough University, United Kingdom (1998)
    Degree Classification 2:1
  • Postgraduate Diploma in Teaching and Learning (UNIMAS)
  • Advanced Diploma Skills Malaysia (Vocational Training
    Manager (VTM)) by Jabatan Pembangunan Kemahiran
    Malaysia
  • CSWIP 3.0 Visual Welding Inspector

 

Professional Affiliation

  • Fellow Member of IEM (Institution of Engineers Malaysia – MIEM) 
  • Professional Engineer (P.Eng) with Practising Certificate – Registration no : C113355 
  • Honorary Major to Royal Malaysia Airforce (RMAF) 2008-2013

Current Position

  • Professor
  • Dean, School of Engineering and Technology
  • Director, School of Engineering and Technology Accreditated Laboratory (ISO17025:2005 – Mechanical Testing 
  • Head, Centre for Research of Innovation and Sustainable Development (CRISD)

Area of Specialization

  • Mechanical Engineering
  • Measurement in Non Destructive Testing in particular optical techniques
  • Finite Element Analysis.

External Examiner to Academic Programme

  1. Swinburne University (2010-2012) for Bachelor in Mechanical Engineering
  2. Swinburne University (2010-2012) for Bachelor in Robotics.
  3. Polytechnic Mukah for 2017 for Diploma in Mechanical Engineering
  4. UNIMAP (2018 – 2020) for Bachelor of Materials Engineering

Accreditation Panel 

  • Panel for UNMC (University of Nottingham Monash Campus) held on 25 – 26 April 2018 – Master of Mechanical Engineering (Hons)
  • Head Panel for UNIMAP (Universiti Malaysia Perlis) held on 7 -8 November 2018 – Bachelor of Materials Engineering
  • Head of Panel for Curtin University, Malaysia held on 3 – 4 April 2019 – Bachelor of Engineering (Mechanical Engineering) (Honours)
  • Interim Assessor for Curtin University Malaysia in February 2021 (Desktop Review)
  • Panel Assessor for Doctor of Philosophy for Swinburne University of Technology Sarawak (SUSTS) held on 24 – 26 February 2021
  • Head Panel for UCSI, Malaysia held on 30 – 31 March 2021 – Bachelor of Mechatronics Engineering with Honours

Auditor

  • MyRA Head Panel for Internal Auditor (2018 – 2020, 2021 – 2003)

Significant Contributions towards UCTS

  1. Develop and enhance the School of Engineering and Technology (SET) 
  2. Accreditation to all programme in SET : Bachelor of Civil Engineering (Honours), Bachelor of Mechanical Engineering (Honours),Bachelor of Technology in Electrical and Electronics Eng. (Hons),Bachelor of Electrical Engineering (Honours),Bachelor of Food Technology (Honours).
  3. Involve and participate in UI GreenMetric and manage to put UCTS top 400 of the world in terms of sustainability
  4. Represented UCTS in many national and international meetings, visits and others.

Teaching & Learning Activities

The teaching and learning activities are as follows: 

UCTS

Year 2021 : Mechanical Design (Second Year Module) 

Year 2020 : Integrated Design Project (Third Year Module) 

                      Mechanical Design (Second Year Module)

Year 2019 : Integrated Design Project (Third Year Module)

                     Mechanical Design (Second Year Module)

Year 2018 : Integrated Design Project (Third Year Module)

                     Mechanical Design (Second Year Module)

                     Operation Management (MBA Module)

Year 2017 : Integrated Design Project (Third Year Module)

                     Mechanical Design (Second Year Module)

                     Operation Management (MBA Module)

Year 2016 : Integrated Design Project (Third Year Module)

                     Mechanical Design (Second Year Module)

Year 2015 : Engineering Materials (Second Year Module)

                     Mechanical Design (Third Year Module)

Year 2014 : Strength of Materials (First Year Module)

UNIMAS

Year 2012/2013 : Mechanical Vibrations (Final Year Module)

                              Finite Element Analysis (Third Year Module)

                              Engineering Ethics (Third Year Module)

                              Final Year Project Supervisor

Year 2011/2012 : Mechanical Vibrations (Final Year Module)

                              Finite Element Analysis (Third Year Module)

                              Engineering Ethics (Third Year Module)

                              Final Year Project Supervisor

Year 2010/2011 : Mechanical Vibrations (Final Year Module)

                              Finite Element Analysis (Third Year Module)

                              Engineering Ethics (Third Year Module)

                              Final Year Project Supervisor

Year 2009/2010 : Condition Monitoring and Maintenance Management (Final 5
Year Module)

                                Quality Control and Reliability (Final Year Module)

                                Engineering Ethics (Third Year Module)

                                Final Year Project Supervisor

Year 2008/2009 : Condition Monitoring and Maintenance Management (Final
Year Module)

                                 Quality Control and Reliability (Final Year Module)

                                 Final Year Project Supervisor

Year 2007/2008 : Condition Monitoring and Maintenance Management (Final
Year Module)

                                 Solid Mechanics I (First Year Module)

                                 Laboratory II Coordinator

                                 Final Year Project Supervisor

Year 2006/2007 : Advanced Manufacturing Systems (Final Year Module)

                                Manufacturing Technology (Second Year Module)

                                Final Year Project Supervisor

Year 2005/2006 : Condition Monitoring and Maintenance Management (Final
Year Module)

                                Engineering Mathematics 1 (First Year Module)

                                Manufacturing Technology (Second Year Module)

                                Final Year Project Coordinator

                                Final Year Project Supervisor

Year 2004/2005 : Condition Monitoring and Maintenance Management (Final
Year Module)

                                 Engineering Mathematics 1 (First Year Module)

                                 Manufacturing Technology (Second Year Module)

                                 Final Year Project Coordinator

                                 Final Year Project Supervisor

Year 2003/2004 : Static (First Year Module)

                                 Engineering Mathematics I (First Year Module)

                                 Numerical Methods and Statistics (Second Year Module)

                                 Final Year Project Supervisor

                                 Workshop Practise Coordinator

Year 2001/2002 : Tutor for Strength of Material (First Year Module) at
Loughborough University

                                Demonstrator for Strength of Material Laboratory (First Year
Module) at Loughborough University

Year 1998/1999 : Static (First Year Module)

                               Electrical Engineering Technology

Teaching and Learning Award and Recognition

  1. Awarded Certificate of Merit for E-Learning Initiative, Centre of Applied Learning and Multimedia, UNIMAS, 18th March 2004.
  2. Evaluator of Postgraduate Diploma (Teaching and Learning) for Module 7 (Micro Teaching)

Student Supervision

PhD Supervision as Main Supervisor 

Completed: 

  1. Mr. Prashobh Karunakaran, PhD, Project entitle ‘Design and Fabrication of ‘Lifter Shoes’ For Hard Disk Industry Using Flexible Manufacturing System’. Started January 2007 and complete in February 2012.
  2. Mr. Tay Chieng Chuang, Project entitle, ‘The Mechanical properties of natural fiber (Sago Residues) Reinforced Urea Formaldehyde resin composite’ Completed December 2017.

MSc Supervision

A. Main Supervisor 

Completed: 

  1. Mr. Alexon Jong, MEng, Project entitle “Design and Development of Interferometer for Hard Disk Surface Measurement’. Completed in 2007.
  2. Mr. Chong Siew Wei, MEng, Project entitle “Design of a Transformer to Reduce the Effect of Temperature’. Completed in 2008.
  3. Mr. Charlie Sia, MEng, Project entitle “Test and Measurement of Mechanical Properties of Carbon Fibre Reinforced Aluminium ’. Completed in 2009.
  4. Mr. Christopher Jantai, MEng, ‘Studies On Thermal Comfort, Heating Ventilation And Air Conditioning (HVAC) Systems In Dewan Tunku Abdul Rahman Putra (DeTar Putra), UNIMAS. Completed in 2016
  5. Mohammad Hafsanjani Salleh, ‘Concentration of Pineapple Juice by a Locally Designed and Fabricated Reverse Osmosis System’, Completed 2019
  6. Buglie ak Nanu,’Mechanical Properties of Acacia wood species’, Completed 2019

In Progress:

  1. Mr. Lim Kian Kiat,’ Development and Evaluation of Driving Cycle in Malaysia Urban Road Systems: A Case Study in Sarawak, Started September 2019
  2. Houng Nai Hao,’ Fuel Consumption of light-duty vehicles in relation to traffic congestion: A case study of Sarawak, Started September 2019

Thesis Examination

  1. MEng Internal Examiner for Mr. Wong Teck Kai, Thesis: Effects of Induced on the Fexural Fatigue Behaviour of Glass Fiber Reinforced Epoxy (GREs) – 2003.
  2. MEng Internal Examiner for Mr. Liew Fui Kiew, Thesis: The Relationship Between The Applied Torque And Stressess In Post Tension Structures – 2006.
  3. PhD Internal Examiner for Mr. Ngu Lock Hei, Thesis: Development and Optimizationj of a Circular Phase Separator with Dual Angle Coalescence lates for Removal of Suspended Solids, Free and Physically Oils From Wastewaters – 2008.
  4. MEng Internal Examiner for Mr. Chai Chuong Jung, Thesis: Power Consumption Pattern Modelling For Effective Distribution Network Planning – 2009
  5. MEng Internal Examiner for Mr. Lim Su Boon, Thesis: A Novel Separator for Palm Oil Kernel Shell Cracked Mixture – 2011.
  6. MEng Internal Examiner for Mr. Muhammad Abdul Mun’aim bin Mohd Idrus, Thesis: Physical and Manufacturing Properties of Chemically Modified Tropical wood Polymer composites – 2011.
  7. MEng Internal Examiner for Mr. Cheong Wai Loon, Thesis: Motion Detection and Simulation Study on Human Walking Behaviour – 2011.
  8. MA Internal Examiner for Miss Nurul Aniza Bt Mijan, Thesis: Keberkesanan Kulit Kerang (Anadara Granosa) Dalam Struktur Pembuatan Tukun Tiruan – 2012.
  9. MA Internal Examiner for Miss Khatijah binti Hanapi, Thesis: Analisa Personaliti Rekabentuk Skuter Berdasarkan Citarasa Pengguna – 2013.
  10. PhD Internal Examiner for Mr. Mohd Hisham bin Omar, Thesis: Kompetensi Teras Pengurusan Reka Bentuk Enterpris Kecil dan Sederhana (EKS) Bumiputra – 2013

Pre-evaluation Examiner

  1. Pre-evaluation examiner for Master Thesis – Mr. Robin Ho – 2010
  2. Pre-evaluation examiner for PhD Thesis – Mr. Md. Saiful Islam – 2011
  3. Pre-evaluation examiner for Master Thesis – Mr. Peter Yek – 2012
  4. Pre-evaluation examiner for Master Thesis – Mr. Kiew Kwong Siong– 2012
  5. Pre-evaluation examiner for PhD Thesis – Mr. Chong Kok Hing – 2013

Thesis External Examiner

  1. MEng External Examiner for Ms Ellizabeth Lazarro, Thesis: Contamination in Recycling Thermoplastics used for Manufacturing of Consumer Durable Products – Swinburne University of Technology, Melbourne, Australia – 2009

Viva Chairman

  1. Chairman for PhD viva for Mr. Almon Chai Wei-Yen, Thesis: Energy utilization and efficiency studies on an integrated tile manufacturing plant – 2006
  2. Chairman for MEng viva for Mr. Leo Sing Lim, Thesis: Relative Shaft Displacement and Vibration Measurement for the Early Fault Detection in Rolling Element Bearing – 2004
  3. Chairman for MEng viva for Mr. Gan Yong Kiong, Thesis: Design and Construction of A Mini Fuel Cell for Interference Detection and Hybrid Solar/Fuel Cell/ Battery Multi Purpose Kit – 2008
  4. Chairman for MEng viva for Mdm Noraziah Wahab , Thesis: Design of PMC Fuel Cell – 2009

Evaluator

  1. MyPhD Research Scholarship Evaluator for Ministry of Science and Technology – 6 candidates

International Exchange Student

  1. Baptiste Cocquerelle, University of Technology, Belfort-Montbéliard, France. Project: Fringe Analysis Software. Start date: September 2006. Completion date: February 2007.

Undergraduate Final Year Projects

  1. Experimental and Finite Element Analysis To Determine Strength of Beverage Can by Mr. Abg Ahmad Salemi Abg Sulaiman (2004).
  2. Experiment Method and Finite Element Analysis on Crack Detection in Material by Then Jip Chong (2004).
  3. Creep Testing in Materials by Lydianna Bt. Johnny Yakop (2004).
  4. Impact Test on Polymers by Mahathir bin Hj Mohd Pattali (2004).
  5. Crack Detection in Welded Joint by Abdul Mutalib Faisal bin Lampung (2005).
  6. Analysis on Joint by Zulfika bin Ismail (2005).
  7. Modelling and Fabrication of Subsonic Wing by Khairul Amin bin Othman (2005).
  8. Development of Crack Propagation using Photoelastic Experiment by Noraizah binti Ugang (2006).
  9. Finite Element Analysis on Lap Joint by Mohammad Rafiq bin Untong (2006).
  10. Design and Finite Element Analysis of Solid Expandable Tubular By Aluyah binti Sipi (2006).
  11. Design of a Solar Chimney by Yong Weng Kheong (2006).
  12. Design and Fabrication of Ice Crusher by Ramfauzan bin Ramlee (2006).
  13. Vibration Analysis in Rotordynamic by Norirda Bt Mohamed (2007).
  14. Design and Fabrication of Coconut Milk machine by Muhammad Aiman bin Zainal Abidin (2007).
  15. Development of Photoelastic experiments by Bibiana Mingel (2008)
  16. Phase Stepping in Interferometry by Lee Kean Yew (2008).
  17. Measurement of Bearing Performance while in Service by Norlelawaty Osman (2009)
  18. Improved Design of a Solar Chimney by Tey Nguan Ngui (2009)
  19. Finite Element Analysis in a T-joint pipe by Dyg. Diyana Bohari (2009)
  20. Ultrasonic Measurement in Ferrous Metal by Noraini Kadir (2010)
  21. Mechanical Testing On Welded Pipes by Yeo Cheng Chuan (2010)
  22. Pump as Turbine by Alan Bong Kim Min (2011)
  23. Vibration Detection in Machining Process by Gan Shou Lung (2011)
  24. Detection of Flaw using Ultrasonic Method in Naval Structure by Ling Choon Peng (2011)
  25. Static and Dynamic Balancing of CN-235 Royal Malaysia Airforce (RMAF) Propeller (2012 Session) by Mr. Loh Ee Yong
  26. Vibration analysis of Water Cooling Pump (2012) by Mr. Ng Qi Xiang
  27. Finite Element Analysis of an Oven Industrial Holder for Photovoltaic Process ( Stress and Thermal Analysis) (2012) by Mr. Fam Mun Shun
  28. Fabrication and Testing of a Nipah Based Fiber Material (2012) by Mr. Fong Boon Shiun.
  29. Carbon Fibre Fabrication and Testing (2013) by Zuriah Ahmad
  30. Wind turbine development (2013) by Loh Jia Xi
  31. Development of Pastry Shell Machine for Cottage Industry (2013) by Bong Sik Hsiang
  32. Vibration characteristics in vehicle (2013) by Kam Chien Fung
  33. Analysis of Momentum Using High Speed Camera Based on Drop Test (2017) by Adzlan Ariss
  34. Reverse Engineering of Product by 3D Scanning Method (2018) by Kong Wei King
  35. The Efficiency of Regenerative Brake for Hybrid Car (2020) by Franklin Joel ak Bage

Student Industrial Attachment to UNIMAS

  1. Mohd Helmi bin Sahmat from Kuching Polytechnic from 16 July – 15 December 2007.
  2. Ahmad Faieq b Alimuda from Kuching Polytechnic from 16 July – 15 December 2007.
  3. Zurina binti Ismail from Kuching Polytechnic from 16 July – 15 December 2007.
  4. Monica ak Anding from Kuching Polytechnic from 16 July – 15 December 2007.
  5. Nurul Faezah bt Mohd Marjan from IKBN Miri from 2nd July – 28 September 2007.
  6. Nazreen Jampi from IKBN Miri from 2nd July – 28 September 2007.
  7. Tracy Dickie from International College of Advanced Technology Sarawak from 4th December – 24 December 2007.
  8. Noriza binti Ibrahim from ADTEC Melaka from 07 January – 4th April 2008

Student Industrial Attachment to UCTS

  1. Abdul Ismail Abdul Rani from University Malaysia Sabah from February 2016 – November 2016
  2. Jerome Emerick from Politeknik Kuching from January 2019 – April 2019

Industrial Visit

  1. Fuji Seats (Malaysia) Sdn Bhd, Rawang, Selangor (2004) x 4 students
  2. Malaysia LNG Sdn Bhd., Bintulu (2005) x 6 students
  3. Asean Bintulu Fertilizer, Bintulu (2005) x 10 students
  4. KTA Sarawak, Kuching (2005) x 1 student
  5. Sejingkat Power Corporation Sdn Bhd, Kuching (2005) x 1 student
  6. Lembaga Air Kuching (2005) x 1 student
  7. Siemens (Malaysia) Sdn Bhd x 1 student
  8. Freescale Semiconductors Sdn Bhd x 1 student
  9. Agilent Technologies Malaysia Sdn. Bhd, Penang (2007) x 2 students
  10. Dynacraft Industries Sdn. Bhd, Penang (2007) x 1 student
  11. Motorola Technology Sdn Bhd, Penang (2007) x 1 student
  12. UNI – Kenyalang Engineering Sdn. Bhd, Kuching (2007) x 1 student
  13. Jurutama Sdn Bhd, Penang (2007) x 1 student
  14. Nestle (Malaysia) Sdn Bhd, Selangor (2008) x 1 student
  15. TQR Engineering Services and Supply, Selangor (2008) x 3 students
  16. Fuji Seats (Malaysia) Sdn Bhd, Rawang, Selangor (2009) x 3 students
  17. APM (Malaysia) Sdn Bhd, Rawang, Selangor (2009) x 4 students
  18. Vepro Group Sdn Bhd, Puchong, Selangor (2009) x 1 student
  19. Keck Seng (Malaysia) Bhd, Masai Palm Oil Mill, Po Box No 1, 81757 Masai, Johor (2011) x 1 student
  20. Malasian Mosaics Berhad, Manufacturing Industry, Tiles Manufacturing, Batu 4, Jalan Batu Pahat, 86000 Kluang Johor (2011) x 2 students
  21. Kimlun Sdn Bhd, PTD 189498, Jalan Molek V27, Taman Molek, Mukim Phutong, daerah Johor Bahru, Johor (2011) x 1 student

Research Activities

  1. Fundamental Research Grant (2004) – completed
    Research Title: Detection and Analysis of Interference Pattern using Interferometry technique – Determining the stress of a material (steel) under load
    Researcher: Mohd Shahril Osman
    Budget: 40000.00
  2. Fundamental Research Grant (2004) – completed
    Research Title: Mechanical Properties of Natural Fibre Composite, Bemban (Donax Grandis).
    Researcher: Mahshuri Yusuf (Project Leader), Mohd Shahril Osman, Sinin Hamdan
    Budget: 20 368.85
  3. Malaysia Pepper Board (MPB) (2008 – 2010) – completed
    Research Title: Design and Development of a Mechatronic Harvester for
    Harvesting Pepper in Typical Terrains
    Researcher: Mohd Shahril Osman (Project Leader), Shahrol Mohammaddan,
    Noor Hisyam Noor Mohamed, Siti Nor Ain Musa, Aidil Azli Alias
    Shamsiah Suhaili
    Budget: 95 000.00
  4. Osaka Gas Research Fund (2007) – completed
    Research Title: Analysis of Oil Palm Waste Composites
    11
    Researcher: Marini Sawawi (Project Leader), Mohd Shahril Osman, Pn Mahshuri Yusuf, Pn Ervina Junaidi
    Budget: 7000.00
  5. Osaka Gas Research Fund (2007) – completed
    Research Title: Development of Grip Mechanism Assistant
    Researcher: Shahrol Mohammaddan (Project Leader), Mohd Shahril Osman, Noor Hisyam Noor Mohamed
    Budget: 10000.00
  6. Osaka Gas Research Fund (2007) – completed
    Research Title: Design and Analysis of a Solar Dryer via Computational Fluid-Dynamics
    Researcher: Ir. Andrew Ragai (Project Leader), Mohd Shahril Osman, Almon Chai, Ervina Junaidi, Marini Sawawi
    Budget: 4000.00
  7. Osaka Gas Research Fund (2009) – completed
    Research Title: Design of a Laptop Cooling Pad by using Eco-composite Material
    Researcher: Ervina Junaidi (Project Leader), Ir Dr Mohd Shahril Osman, Siti Halipah Ibrahim, Marini Sawawi, Mahshuri Yusuf, Noor Hisyam Noor Mohamed
    Budget: 5000.00
  8. Osaka Gas Research Fund (2009) – completed
    Research Title: Pepper Plantation in Sarawak and the Potential of Pepper Waste in Biodiesel Fuel Production
    Researcher: Siti Nor Ain Musa (Project Leader), Ir Dr Mohd Shahril Osman, Shahrol Mohammaddan, Aidil Azli Alias
    Budget: 5000.00
  9. Osaka Gas Research Fund (2009) – completed
    Research Title: Numerical Analysis of RF MEMS Capacitor with Accelerated
    Motion Effect for Low-Power Applications
    Researcher: Shafrida Sahrani (Project Leader), Ir Dr Mohd Shahril Osman, Pn Annie Joseph
    Budget: 5000.00
  10. Osaka Gas Research Fund (2009) – completed
    Research Title: Development of Energy Efficient Raman Spectroscope
    for Material Identification
    Researcher: Aidil Azli bin Alias (Project Leader), Ir Dr Mohd Shahril
    Osman, Mohamad Iskandar Jobli, Siti Nor Ain Musa
    Budget: 5000.00
  11. Osaka Gas Research Fund (2009) – completed
    Research Title: Investigations on behaviour and energy release of
    12
    composites with different filler
    Researcher: Noor Hisyam bin Noor Mohamed (Project Leader), Ir Dr Mohd Shahril, Mahsuri Yusuf, Ervina Junaidi, Marini Sawawi
    Budget: 4000.00
  12. Osaka Gas Research Fund (2010) – completed
    Research Title: Experimental Evaluation of Different Insulation Material in Roofing System Under Tropical Climate
    Researcher: Mdm Mahshuri Yusof (Project Leader), Mohd Shahril Osman, Siti Noor Linda Taib, Ervina Junaidi, Jethro Henry Adam
    Budget: 3500.00
  13. Osaka Gas Research Fund (2010) – completed
    Research Title: Development of Cylindrical Solar Water Heater Using Different Collector Designs and Collector Materials
    Researcher: Nur Tahirah Razali (Project Leader), Mohd Shahril Osman,
    Nazeri Abdul Rahman, Mdm Ervina Junaidi
    Budget: 7000.00
  14. Osaka Gas Research Fund (2011) – completed
    Research Title: The Study of Vegetable Based Cutting Fluid Performance in Turning Process
    Researcher: Abang Mohammad Nizam bin Abang Kamaruddin
    (Project Leader), Mohd Shahril Osman, Abdullah Yassin, Noor Hisyam Noor Mohamed
    Budget: 12000.00
  15. Osaka Gas Research Fund (2011) – completed
    Research Title: Investigation on Energy Absorption Characteristics of Natural Fiber Composite
    Researcher: Noor Hisyam Noor Mohamed (Project Leader), Mohd Shahril Osman, Mahshuri Yusuf, Aidil Azli Alias
    Budget: 12000.00
  16. Osaka Gas Research Fund (2012) – completed
    Research Title: Analysis of Multi-Scale Microbial Fuel Cell for Simple Electrification in Rural Areas
    Researcher: Mr. Mohamad Iskandar Jobli (Project Leader), Ir Dr Mohd Shahril Osman, Mdm Kertini Monir, Mr. Abg Mohd
    Nizam Abg Kamaruddin
    Budget: 6500.00
  17. Osaka Gas Research Fund (2012) – completed
    Research Title: Improvements of Static and Dynamic Characteristics for High Performance Mobile Hard Disk Drives
    Researcher: Dr Mohd Danial Ibrahim (Project Leader), Ervina Yusof, Ir Dr Mohd Shahril Osman, Prof Amir Azam Khan
    Budget: 9500.00
  18. Osaka Gas Research Fund (2012) – completed
    Research Title: Improving Rice Milling Machine for Domestic Application
    Researcher: Ervina Yusof (Project Leader), Mr. Abg Mohd Nizam Abg Kamaruddin Dr. Siti Noor Linda, Mdm Mahshuri Yusof, Ir Dr Mohd Shahril Osman
    Dr Mohd Danial Ibrahim
    Budget: 5000.00
  19. UCTS Internal grant research (2014) – completed
    Research Title: The Mechanical And Properties Of Natural Fiber (Sago Residues) Reinforced Urea Formaldehyde Resin Composite
    Researcher: Ir Dr Mohd Shahril Osman (Project Leader), Azrul Zulwali Kifli, Syazie Nordzaima
    Budget :RM17,120 – lead researcher
  20. UCTS Internal grant research (2015) – in progress
    Research Title: Sibu Peat Stabilization using Acrylic Copolymer Admixture
    Researcher: Azrul Zulwali Kifli (Project Leader), Syazie Nordzaima, Ir Dr Mohd Shahril Osman,
    Budget :RM17,000 – lead researcher
  21. UCTS Internal grant research (2015) – in progress
    Research Title: The Engineering Properties and Effect of Geogrid on Peat in Sibu, Sarawak
    Researcher: Syazie Nordzaima (Project Leader), Azrul Zulwali Kifli, Ir Dr Mohd Shahril Osman,
    Budget :RM19,740 – lead researcher
  22. UCTS Internal grant research (2016) – in progress
    Research Title: Investigation of Potential Hybrid Bio-Filler for Concrete Supplementary
    Researcher: Dr Mazizah Ezdiani binti Mohamad (Project Leader), Nur Hafizah Binti Khalid, Azrul Zulwali Kifli, Ir Dr Mohd Shahril Osman,
    Budget :RM20,000
  23. UCTS Internal grant research (2016) – in progress
    Research Title: Investigation of Potential Hybrid Bio-Filler for Concrete Supplementary
    Researcher: Dr Mazizah Ezdiani binti Mohamad (Project Leader), Nur Hafizah Binti Khalid, Azrul Zulwali Kifli, Ir Dr Mohd Shahril Osman,
    Budget :RM20,000
  24. UCTS Internal grant research (2016) – in progress
    14
    Research Title: Production of Activated Carbon from Palm Kernel Shell by Microwave Induced Pyrolysis
    Researcher: Peter Yek Nai Yuh (Project Leader), Ir Dr Mohd Shahril Osman,
    Budget :RM20,000
  25. UCTS Internal grant research (2016) – in progress
    Research Title: Concentration of pineapple juice by a locally designed and fabricated reverse osmosis system
    Researcher: Zahid Abidin, Mohd Shahril Osman, Ashraf Abd Razak, Mohammad Hafsanjani Salleh
    Budget: RM 20000.00
  26. UCTS Internal grant research (2018) – in progress
    Research Title: Development of Self-Sustainable Pyrolysis System to Convert Biomass into Bio-char
    Researcher: Mohd Shahril Osman, Peter Yek Nai Nuh. Kong Sieng Huat
    Budget: RM25,000.00
  27. UCTS Internal grant research (2018) – in progress
    Research Title: Production of Bio-char from Oil-Palm Waste Through Vacuum Carbonizer for Mushroom Cultivation
    Researcher: Peter Yek Nai Nuh, Mohd Shahril Osman, Wong Chee Chung, Kong Sieng Huat, Wong Chee Swee
    Budget: RM25,000.00

Publication

Books

  1. Books chapter in ‘Service Robotics and Mechatronics’ S. Mohamaddan and M.S. Osman, 2010, “Development of Grip Mechanism Assistant Device for Finger Rehabilitation,” in Service Robotics and Mechatronics, Springer, pg 95 – 100.
  2. Manual – AutoCAD Manual Beginner, 2010, UNIMAS.
  3. Proceeding of Engineering Conference (ENCON) 2010. Chief Editor.
  4. Course Manual – Vibration Course, 2009, UNIMAS

Journal

  1. MS Osman, JM Huntley, RD Wildman, Vol. 43, Issue 7, July 2005, ‘Measurement of grain-wall contact forces in a granular bed using frequency-scanning interferometry’, Optics and Lasers in Engineering, pg 752-766.
  2. Leo SL, MS Osman, Vol 65, No ¾, 2004, ‘Detection Of A Single Rolling Element Bearings Fault Via Relative Shaft Displacement Measurement’, pg 43 – 49.
  3. Mohammad Shahril Osman, Vol 13, No 1 & 2 (2005), ‘Analysis of Substrate Using Image Analysis’,Solid State Science and Technology,), pg 80 – 92.
  4. F.K Liew, S. Hamdan, M.S. Osman, January/February 2007, ‘The Relationship Between the applied torque and stresses in post tension stuructures, CINDE Journal 29(5), pg 8-11, 2008
  5. MS Osman, C. Sia, ‘Tensile Performance of Hybrid Polyester-Based Composite Reinforces With Glass and Oil Palm Fiber in Aluminium Laminates’, AES Technical Reviews International Journal: Part B – International Journal of Advances in Mechanics and Applications of Industrial Materials (IJAMAIM) (ISSN – 1718 – 5505), 1 (1) 2009, pg. 77 – 82.
  6. S. Sahrani, M. Kuroda, M.S. Osman, E.D. Mieng, ‘Efficient Analysis of RF-MEMS Capacitor with Accelerated Movement,’ MASAUM Journal of Basic
    And Applied Sciences (MJBAS), ISSN 2076-0841, Vol 1, Issue 2, September 2009.
  7. Prashobh Karunakaran & Mohammad Shahril Osman, ‘Optimization of A Flexible Manufacturing System (Fms) For High Technology Product Producing Factory Via The Modularization Of Production’, International Journal Mechanical Engineering and Robotics Research, ISSN 2278-0149, Vol 1, No1, April 2012, pg 1 – 13.
  8. Prashobh Karunakaran & Mohammad Shahril Osman, ‘A Study Into The Feasibility Of Consumers Triggering Factory Robots To Start Production Over The Internet To Optimize The Current Purchasing System’ Journal of Manufacturing Engineering, June, 2013, Vol. 8, Issue. 2, pp 71-74
  9. Tay Chen Chiang, Mohd Shahril.Osman, Sinin Hamdan, ‘Water Absorption and Thickness Swelling Behavior of Sago Particles Urea Formaldehyde Particleboard’, International Journal of Science and Research (IJSR),Volume 3 Issue 12, December 2014, pg 1375 – 1379
  10. Tay Chen Chiang, Sinin Hamdan, Mohd Shahril Osman, ‘The effect of Weight Fraction and Size on the Properties of Sago Particles Urea Formaldehyde Particleboard’, Jurnal Teknologi, Vol 73 (1), 2015 pg 61-67, 2016
  11. T.C. Chiang, S. Hamdan, M.S. Osman,’Mechanical Strength of Sago/Urea Formaldehyde Particleboard Affected by the Particle Size, Applied Mechanics and Materials, Vol 833, 2016, pg 3-10
  12. Tay Chen Chiang, Sinin Hamdan, Mohd Shahril Osman , ‘Mechanical Properties of Sago/Urea Formaldehyde Particleboard Affectedby the Weight Fraction of Sago’, Matec Conferences, EDP Sciences, 27, (2015)
  13. Tay Chen Chiang, Sinin Hamdan, Mohd Shahril Osman , ‘Urea Formaldehyde Composites Reinforced with Sago Fibres Analysis by FTIR, TGA, and DSC’, Advanced in Materials Science and Enginering, Vol 2016, Article ID 5954636
  14. S.H Kong, S.S Lam, P.N.Y Yek, R.K Liew, N.L Ma, M.S Osman and C.C Wong, ‘Self-purging microwave pyrolysis: an innovative approach to convert oil palm shell into carbon – rich biochar for methylene blue adsorption’, Volume 94, Issues 5, May 2019, pg 1397 -1405
  15. Abdul Ismail Abdul Rani, Ghosh Bablu Kumar, Khairul Anuar Mohamad, Mohd Shahril Osman, Fuei Pien Chee and Ismail Saad,’ Correlation Study of Structural and Optical Properties of ZnO/PTAA Hybrid Heterojunction Layer, Journal of Physics: Conference Series, 1358 (2019)
  16. Prashobh Karunakaran, M. Shahril Osman, Prashanth Karunakaran, Shanthi Karunakaran, Arjun Karunakaran, Man Djun Lee, Kwong Hieng Ting, Alexon John (2020). HV Switchgear Switching System. Asian Journal of Convergence
    16
    in Technology (AJCT), ISSN NO: 2350-1146 I.F-5.11, 6(3), 77-85. https://doi.org/10.33130/AJCT.2020v06i03.012
  17. Prashobh Karunakaran, Prashanth Karunakaran, Shanthi Karunakaran, Arjun Karunakaran, Man Djun Lee, M. Shahril Osman, Muhd Dina Fadhilah, Karuppanna V, Sung Chee Cheng. (2020). Proving that Eddy Current is the Main Heat Generator for a Current Carrying Cable Suspended in a Steel Pipe. Asian Journal of Convergence in Technology (AJCT), ISSN NO: 2350-1146 I.F-5.11, 6(3), 55-64. https://doi.org/10.33130/AJCT.2020v06i03.010.
  18. Karunakaran, Prashobh; Osman, M. S.; Karuppanna, V.; Cheng, S. C.; Lee, M.D.; John, A.; Hieng, T. K. (2020). A High Voltage Switchgear Switching System. IEEE Explore. ISBN 978–80–7043–987–6. ISSN 1803–7232.
  19. Karunakaran, P., Osman, M. S., Karuppanna, V., Cheng, S. C., Lee, M. D., Fadhilah, M. D., & Lau, A. K. S. (2020, November). Eddy Current versus Joule Heating Effects for a Cable Suspended in an Iron Pipe. IEEE Explore. ISBN 978–80–7043–987–6. ISSN 1803–7232.IEEE.
  20. Karunakaran, Prashobh; Osman, M. S., Karuppanna, V., Cheng, S. C., Djun, L. M., John, A., & Hieng, T. K. (2020/9/21). Design and Building a High Voltage Switchgear Safety System. IEEE Explore. ISBN 978–80–7043–987–6; ISSN 1803–7232; DOI:10.1109/ICCSP48568.2020.9182459.
  21. Karunakaran, Prashobh; Osman, M. S.; Karuppanna, V.; Cheng, S. C.; Lee, M. D.; Richard, A.; Lau, A. K. S. (2020/9/4). Electricity Transmission Under South China Sea by Suspending Cables Within Pipes. IEEE Explore. ISBN 978–80–7043–987–6. ISSN 1803–7232, DOI: 10.1109/INCET49848.2020.9154119.
  22. Abdul Ismail Rani, M.S. Osman, Khairul Anuar Mohamad, Bablu K Ghosh, Fuei Pien Chee, ‘Effect of Temperature Dependence on Electrical Characterization of Hubrid ZnO/PTAA based Heterojunction Diode’, ASM Science Journal, September 2020

Journal Publication

  1. Chief Editor, International Journal of Design and Innovation (IJDI), 2012 – 2013.

Proceedings

  1. M.S. Jumali, M.S. Osman, S. Hamdan, 2004, ‘Initial Study on Small Scale Structural Defects using Vibration Monitoring Technique’, Annual Fundamental Science Seminar, University Technology Malaysia.
  2. S. Hamdan, C.C. Ngee M.S. Osman, 2004, ‘In-situ Determination of Loading Steel Using Ultrasonic’, Annual Fundamental Science Seminar, University Technology Malaysia.
  3. L.H. Fien, K. Hong Ping, M.S. Osman, N. Julai, 2004, ‘Investigation of Canny Technique for the Edge Detection in Image Processing’, Annual Fundamental Science Seminar, University Technology Malaysia.
  4. M.S. Osman, 2006, ‘Fizeau Interferometer Techniques in Measuring Indentation of a Double Layer Elastic Substrate’, Proceedings of Laser and Electro-optics Seminar (LEOS), University Technology Malaysia. pg 177-184.
  5. M.S. Osman, A. Jong, 2006 ‘Fourier Transform Method for Measurement of Nickel Plated Polished Substrate Surface Texture’, Proceedings of Laser and Electro-optics Seminar (LEOS), University Technology Malaysia. pg 191-197.
  6. Chong Siew Wei, Mohd Shahril Osman, Martin Anyi, 2008, ‘Finite Element Analysis of Thermal Gradient of Transforment Windings,’1st Engineering Conference: Energy and Environment, Crwone Plaza Kuching, pg 259-263.
  7. A. Rigit, A.Chai, E. Junaidi, MS Osman, 2008, ‘Design of a Solar-Based Dryer for Agricultural Product Drying,’1st Engineering Conference: Energy and Environment, Crowne Plaza Kuching, pg 268-271.
  8. Charlie Sia Chin Voo and Mohammad Shahril Osman, (2008) ‘Hybrid Effect in the Tensile Performance of Bio-fiber/Glass Hybrid Fiber Reinforced Polyester composites with Aluminium laminates’ International Conference on Mechanical and Manufacturing Engineering (ICME2008), Johor Bahru.
  9. Shafrida Sahrani, M. Shahril Osman, Michiko Kuroda, “A Numerical Approach to the Efficient Analysis of 2D RF-MEMS Capacitor with Accelerated Motion”, Proceedings of the IEEE International Symposium on Antennas and Propagation and 2009 USNC/URSI National Radio Science Meeting, South Carolina USA June 2009
  10. S. Mohamaddan, M.S. Osman and J.W.H. Wang, “Development of Grip Mechanism Assistant Device for Finger Rehabilitation,” Proceeding of International Conference on Machine Automation 2008 (ICMA2008), Awaji, Japan, September 2008
  11. Prashobh Karunakaran, M. Shahril Osman, Karuppanna V., Sung Chee Cheng, Man Djun Lee. (2019) Optimization of a Hard Disk Factory. International Journal of Mechanical Engineering and Technology 10(10), pp. 217-228.

Articles for Bulletin

  1. Manufacturing Facilities at the Faculty of Engineering for OUTREACH Vol. 1 No. 2 (December 2007) issue.
  2. Application of learning theories in teaching and learning in the Faculty of Engineering” published in FENG Magazine 2008/2009, Mohd Shahril Osman, Shafrida Sahrani, Aidil Azli Alias, Kuryati Kipli, Onni Suhaiza Selaman, Siti Nor Ain Musa, Ron Aldrino Chan, Larry Silas Tirau
  3. Spicing Up Pepper Production, Asia Research News 2009

 

Conferences and Symposium Attended

  1. MS Osman, JM Huntley, RD Wildman, Photon 02, Cardiff International Arena, Wales, 2-5 Sep. 2002. Paper entitles ‘Measurement of grain-wall contact forces in a granular bed using frequency-scanning interferometry’.
  2. in a granular bed using frequency-scanning interferometry’.
    2. MS Osman, Entech 2003, Crowne Plaze riverside, Kuching Sarawak, 30th July – 1st Aug. Paper entitles ‘Contact Force Measurement of a double layer elastic substrate using frequency-scanning interferometer’.
  3. MS Osman, The XX Regional Conference On Solid State Science and Technology, Lumut, Perak 12-14 Dec 2003. Paper entitles ‘Finite Element Analysis of a Double Layer Elastic Substrate’.
  4. MS Osman, Annual Fundamental Science Seminar 2004, Ibnu Sina Institute for Fundamental Science Studies, Universiti Teknologi Malaysia. Paper entitles ‘Initial Study on Small Scale Structural Defects using Vibration Monitoring Technique’.
  5. MS Osman, National Photonic Seminar 2006, June 28-29, 2006, Sofitel Palm Resort, Senai, Johor. Paper entitles ‘Fizeau Interferometer techniques in measuring indentation of a double layer elastic substrate’.
  6. MS Osman and A. Jong, National Photonic Seminar 2006, June 28-29, 2006, Sofitel Palm Resort, Senai, Johor, Paper entitles ‘Fourier Transform Method for Measurement of Nickel Plated Polished Substrate Surface Texture’.
  7. MS Osman. P. Karunakaran, S. Mohammaddan, S. Sharani, E. Junaidi, M. Sawawi, 2nd Engineering Conference on Sustainable Engineering, Infrastructure Development and Management, November 18 – 19 2008, Crowne Plaza, Kuching, Sarawak, Paper entitles ‘Modularity as a Solution to Flexibility in High Technology Manufacturing’ .
  8. The 28th Annual Conference of The Robotics Society of Japan, 22 – 24 September 2010, as participant.
  9. C.S. Voon and M.S. Osman, ’Harnessing Vibration into Electrical Energy’, Proceedings of EnCon2011, 4th Engineering Conference, Kuching, Sarawak, November 2011
  10. Tracy Dickie and M.S. Osman, ‘Extraction Process of Nipah Palm Fibre’ Proceedings of EnCon2012, 5th Engineering Conference, Kuching, Sarawak, July 2012

Workshop/seminar attended

  1. Seminar Bahasa Melayu Bahasa Ilmu, 26-27 April 2003, held at Dewan Bahasa dan Pustaka, Sarawak.
  2. Workshop on Environmental Impact Assessment (EIA), May 5-7th 2003, held at Belian Room, Unimas.
  3. Workshop on Management of Intellectual Property Rights, Sept. 26-27th 2003 held at Merdeka Palace, Kuching, Sarawak.
  4. Seminar on OBE Outcomes Based Education, 30th May 2005, held at Faculty of Engineering, UNIMAS
  5. Postgraduate Supervision Course, 14 – 15 June 2005, held at Marriot Hotel, Putrajaya.
  6. 4th University – Industry Seminar, A Vision Within: Leadership Rediscovered, 25 – 26 February 2006 held at University of Malaya
  7. Strategic Planning Workshop, 18-19th December 2006, held at Staff Training Centre, Bau
  8. PTK3, 26 November – 4 December 2007 organized by Centre of Applied Learning and Multimedia, UNIMAS.
  9. Science Direct Workshop held at Centre of Information Services (CAIS) – 2008
  10. Appreciation of UNIMAS Mission and Vision, 9 – 11 May 2008 organized by Centre of Applied Learning and Multimedia, UNIMAS, held at Damai Beach Resort.
  11. Postgraduate Diploma in Teaching and Learning (Cohort 6) 2008
  12. Seminar on Thomson Direct organized by CAIS – 2010.
  13. Workshop on TRIZ (Theory of Innovative Problem Solving) 20 – 22nd June 2011 held at FSKTM, UNIMAS.
  14. Innovation Policy for Human Capitol and Sustainable Development vis Higher Education, 29 – 31 October 2012, held at AKEPT, Bandar Enstek, Negeri Sembilan
  15. Sarawak Timber Industry Laboratory No.5, 22 – 24 October 2012, held at Riverside Majestic, Sarawak.

Technical Paper Reviewed

  1. The used of finite element analysis in designing a fatigue of 2024-T351 Al-Alloy friction stir welding test specimen geometry. Reviewed for IEM Journal, 2006.
  2. Multi-view Scans Alignment for 3D Spherical Mosaicing in Large-Scale Unstructured Environments. Review for Journal of Computer Vision and Image Understanding, October 2009.
  3. Optical Memory Time Using Multi Bright Soliton. Reviewed for Proceedings for International Conference on Experimental Mechanics 2010.
  4. Optimal Design by Elitist-Generic Algorithm for Maximum Fundamental Frequency of Fiber Metal Laminated Plates. Reviewed for Proceedings for Eighth International Conference on Composite Science and Technology ICCST8
  5. The Preparation, Structures and Properties of Poly(vinylidene fluoride)/Microcrystalline Cellulose Nanocomposites. Reviewed for Proceedings for Eighth International Conference on Composite Science and Technology ICCST8.
  6. Application of clam (lokan) Shell as Beach Retaining Wall for Engineering Conference (Encon2011)
  7. Experimental Investigation of an Active Mixed Mode Solar Dryer for Fish Drying Application at Kampung Semera Laut, Sadong Jaya, Sarawak for Engineering Conference (Encon2011).
  8. Study of Application of Clamshell for Artificial Reef for Engineering Conference (Encon2011).
  9. An Insight Into Remanufacturing for Engineering Conference (Encon2011).
  10. Modeling and Simulation of Deep Drawing Process for Engineering Conference (Encon2011).
  11. Robust Mathematical Optimisation for Conceptual Design of a Reliable and Sustainable Integrated Biorefinery with Uncertainties of Product Cost for Engineering Conference (Encon2011).
  12. Numerical Studies Of Crashworthiness Behavior On Hollow And Polyurethane Foam-Filled Mild-Steel Tapered Tubes Under Dynamic Oblique Loading for Proceedings of the 2nd. International Conference on Arts, Social Sciences & Technology, 2012.
  13. Effect of Thermo-Mechanical Processing on the Structure and Mechanical Properties of Cast Fe-0.30% P-0.24% C Alloys for Proceedings of the 2nd. International Conference on Arts, Social Sciences & Technology, 2012.
  14. Development of a Micro Energy Harvester, for Engineering Conference (Encon2012).
  15. Problems and Challenges in EDM Electrode Fabrication using RP: A critical review for International Journal of Mechanical Engineering and Research
  16. Treatment Performance of Palm Oil Mill Effluent by Utilizing Chitosan and Ferric Chloride Coupled with Activated Carbon and Ultra Sound Bath for International Journal of Engineering and Technology (2019)
  17. Energy Extraction from Low Height Sea Wave in Sarawak Near Shore Region for International Journal of Engineering and Technology (2019)

Exposition

  1. Participate in 2nd Annual Unimas R&D exposition 2008, 5 – 7 March 2008, CAIS Exhibition Centre, organized by UNIMAS.
  2. Participate in Pecipta 2009, 8 – 10 October 2009, Kuala Lumpur Convention Centre (KLCC) organized by University Malaya.
  3. Participate in Unimas R&D Exposition, 28 – 29 March 2011, CAIS Exhibition Centre, organized by UNIMAS.
  4. Participate in International Engineering Invention and Innovation Exhibition (I-Envex), 8 – 10 April 2011, Dewan 2020, Kangar, Perlis, organized by Universiti Malaysia Perlis. – Bronze Medal
  5. Participate in Unimas Research and Development Exposition 2012, 21st – 22nd March 2012, organized by UNIMAS. – Bronze Medal
  6. Participate in International Engineering Invention and Innovation Exhibition (I-Envex), 2013, Dewan 2020, Kangar, Perlis, organized by Universiti Malaysia Perlis. – Silver Medal
  7. Participate in International Engineering Invention and Innovation Exhibition (I-Envex), 2014, Dewan 2020, Kangar, Perlis, organized by Universiti Malaysia Perlis. – Bronze Medal
  8. Participate in 10th International Greentech & Eco Products Exhibition & Conference Malaysia (IGEM 2019) at KLCC, 9 – 11 October 2019 organised by MESTECC

Conference ( Organizing and Committee)

  1. Chairperson for Programme and Protocol Committee for ’1st Engineering Conference: Energy and Environment, Crowne Plaza Kuching (ENCON 2007).
  2. International Advisory Committee For The 2nd International Conference On Control, Instrumentation And Mechatronic Engineering (CIM2009) Melaka, Malaysia
  3. Chairman for Engineering Conference (ENCON) 2010 for ’3rd Engineering Conference: Advancement in Mechanical and Manufacturing Engineering for Sustainable Environment, Pullman Hotel, 14 – 16 April 2010
  4. International Advisory Committee For The 2nd International Conference On Control, Instrumentation And Mechatronic Engineering (CIM2009) Melaka, Malaysia
  5. Committee Member in Green Materials in IMTCE (7th International Materials Technology Conference and Exhibition) 2010.
  6. Technical committee member for Engineering Conference (ENCON) 2011 for 4th Engineering Conference: Advances and Innovations in Electrical, Electronics, Telecommunication, Computing Engineering And Technologies, 29th November – 1st December 2011.
  7. Technical committee member for Engineering Conference (ENCON) 2011 for 5th Engineering Conference: Engineering Towards Change – Empowering Green Solutions, 10 – 12 July, Kuching Sarawak
  8. Deputy Chairman for 1st International Conference on Design and Innovation 2012, DeTAR Putra, UNIMAS, 7– 8 November 2012
  9. Committee Member in 4th International Service Innovation Design Conference (4th ISIDC), DeTar Putra/Damai Puri Resort and Spa, 21 – 23 October 2014.

Research Training

  1. Professional Course,’ Image Processing’ held at Novotel Century Hotel, Kuala Lumpur, Dec 8-9th 2003.
  2. Training under Osaka Gas Fund in Bonn, Germany. The training was held on 24 – 28 January 2005. The training was held under energy theme. Two places of training were given. The first was Leybold Didantic. The second place was at at Hochschule Für Technik (University of Applied Science at Karlruhe) with Prof Guntram Schultz which is one of Germany experts in renewable energy as well as power delivery.
  3. Training at My Robotics, Ipoh Perak held on 20 – 24th November 2006. The training was to train UNIMAS staff on flexible manufacturing systems.
  4. Training at JEOL Ltd, Japan held on 18 – 22 June 2007. The training was to give first hand approach on Scanning Electron Microscope (SEM).
  5. Visit to Shibaura University on 21 – 24 September Saitama, Japan.
  6. Visit and Training at NARO (National Agriculture and Research Organization), on 21st September 2010, Saitama, Japan.

Consultancy

  1. Coordinator for Open University (OUM) Laboratory – 2004
  2. Coordinator for Open University (OUM) Laboratory – 2005
  3. Demonstrator for Open University (OUM) Laboratory – 2005
  4. Coordinator for Open University (OUM) Laboratory – 2006
  5. Coordinator for Open University (OUM) Laboratory – 2008
  6. Coordinator for Open University (OUM) Laboratory – 2009
  7. Demonstrator for Open University (OUM) Laboratory – 2010
  8. Coordinator for Open University (OUM) Laboratory – 2010
  9. Strategic Man Power Studies for SCORE (Sarawak Corridor in Renewable Energy), July 2009 – 2011. Cluster Leader for Aluminum and Metal
  10. Coordinator for Finite Element Analysis Course for U-SCORE – 2009
  11. Facilitator for Vibration Course for U-Score – 2009
  12. Coordinator for AutoCAD Course for Unimas Short Course – 2010
  13. Facilitator for AutoCAD Course for Unimas Short Course – 2010
  14. Member on Yayasan Inovasi Malayia (YIM) on Jejak Inovasi.
  15. Leader for Malaysia Driving Cycle, Phase III.

Professional Attachment

  1. Attached to Ship Building Unit at Brooke Dockyard and Engineering Works Corporation from 15 March June – 14th June 2004.
  2. Attached to Ranhill Bersekutu Sdn Bhd from 2nd March 2006. Project to project basis

Administrative Duties

At UNIMAS (2003-2013)

Year 2003/2004 : Coordinator for Common Faculty Courses

Year 2004/2005 :Coordinator for Common Faculty Courses
                                 Panel for Postgraduate committee
                                 Panel for Research and Conference committee
                                 Chairman for Osaka Gas Scholarship – Faculty Level

Year 2005/2006 : Final Year Project Coordinator
                                 Panel for Postgraduate committee
                                 Panel for Research and Conference committee
                                 Chairman for Osaka Gas Scholarship – Faculty Level

Year 2006/2007 : Head of Department
                                 Panel for Postgraduate committee
                                 Panel for Research and Conference committee
                                 Panel for Academic committee
                                 Panel for Strategic Planning for the faculty
                                 Panel in Faculty Examination Board
                                 Panel in Engineering Faculty Management committee
                                 Panel in Laboratory Management Committee

Year 2007/2008 : Head of Department (1st July 2006 – 30th June 2008)
                                 Panel for Postgraduate committee
                                 Panel for Research and Conference committee
                                 Panel for Academic committee
                                 Panel for Strategic Planning for the faculty
                                 Panel in Faculty Examination Board
                                 Panel in Engineering Faculty Management committee
                                 Panel in Occupational Safety and Health committee
                                 Chairman for Osaka Gas Scholarship – Faculty Level
                                 Co-advisor for Shell Prestige Programme 2008

Year 2008/2009 : Panel for Postgraduate committee
                                  Panel for Research and Conference committee
                                  Chairman for Osaka Gas Scholarship – Faculty Level
                                  Member in Osaka Gas Research Fund – Faculty Level

Year 2009/2010 : Panel for Postgraduate committee
                                 Panel for Research and Conference committee
                                 Chairman for Osaka Gas Scholarship – Faculty Level
                                 Member in Osaka Gas Research Fund – Faculty Level
                                 Deputy Director for Center of Renewable Energy (CoeRe) in UNIMAS

Year 2010/2011 : Panel for Postgraduate committee (end on February 2011)
                              Panel for Research and Conference committee (end on
February 2011)
                              Unit Leader for Industrial Training Unit 2011 – 2013
                              Chairman for Osaka Gas Scholarship – Faculty Level
                              Member in Osaka Gas Research Fund – Faculty Level
                              Research Fellow in InDI (Institute if Design and Innovation)

Year 2011/2012 : Unit Leader for Industrial Training Unit 2011 – 2013
                              Chairman for Osaka Gas Scholarship – Faculty Level
                              Member in Osaka Gas Research Fund – Faculty Level
                              Research Fellow in InDI (Institute if Design and Innovation)

Year 2012/2013 : Unit Leader for Industrial Training Unit 2011 – 2013
                               Chairman for Osaka Gas Scholarship – Faculty Level
                               Member in Osaka Gas Research Fund – Faculty Level
                               Research Fellow in InDI (Institute if Design and Innovation)

Year 2014 : Head of Programme (Mechanical)
                      Research Working Committee

AT UCTS (2014-Present) 

Year 2014/2015 : Head of Programme (Mechanical) – until August 2015
                                Dean of School of Engineering and Technology
                                Research Working Committee – until August 2015
                                Senate Member
                                Member in University Boards of Examiner
                                Member in University Academic Committee
                                Member in University Management Committee
                                Chairman for SET Management Committee
                                Chairman for SET Academic Committee

Year 2015/2016 : Dean of School of Engineering and Technology
                               Senate Member
                               Member in University Boards of Examiner
                               Member in University Academic Committee
                               Member in University Management Committee
                               Chairman for SET Management Committee
                               Chairman for SET Academic Committee

Year 2016/2017 : Dean of School of Engineering and Technology
                               Senate Member
                               Member in University Boards of Examiner
                               Member in University Academic Committee
                               Member in University Management Committee
                               Chairman for SET Management Committee
                               Chairman for SET Academic Committee

Year 2017/2021 : Dean of School of Engineering and Technology
                               Senate Member
                              Member in University Boards of Examiner
                              Member in University Academic Committee
                              Member in University Management Committee
                              Chairman for SET Management Committee
                              Chairman for SET Academic Committee
                              Chairman for SET Student Misconduct

Other Information 

  1. Recipients of Sarawak Shell Scholarship 1994 – 1998
  2. Recipients of Loughborough University Studentship 1999 – 2002
    Excellence Service Award (Anugerah Perkhidmatan Cemerlang, APC) for the year 2004.
  3. Excellence Service Award (Anugerah Perkhidmatan Cemerlang, APC) for the year 2005.
  4. Excellence Service from 2004 – 2012.